FX-551P-C2
Digital Display Type Fiber Amplifier
● PNP o/p,
● Response Time :60 µs
● Cable Type
-
Product category
-
sub-category
-
Partner name
-
Series name
Attributes
Type
Fiber Sensor AmplifierOutput
PNPResponse Time
60 MicrosecondConnection Type
Fixed Cable, 2mEmitting Element
Red LED
| Type | Fiber Sensor Amplifier | Shape | Rectangular | Sensing Range | – |
| Sensing Width | – | Digital Dispaly | Yes | Output | PNP |
| Output Operation | L-ON / D-ON Selectable | Input supply | 12 to 24 VDC | Emitting Element | Red LED |
| Bending Radius | – | Connection Type | Fixed Cable, 2m | Beam Spot Diameter | – |
| Timer Function | Yes | Response Time | 60 µs | Sensitivity setting | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Enclosure | Polycarbonate | Protection | – | Beam axis dia.(mm) | – |
| Beam axis position / Inclination of beam axis |
– | Ambient temp | – | Particular Characteristics | – |
●The sensing range of the thin reflective type fiber is about 1.6 times longer than that of a conventional product. This adds extra flexibility to the sensor layout. Thanks to the high emission power, a slight deviation of beam axis causes no problem. It is ideal for use in dusty areas* or for detection through an extremely small slit.
●When the hysteresis is the same, the higher incident light intensity results in more stable detection. When setting to activate the environment resistance mode in the emission frequency setting, the ambient illuminance for LED lights becomes about 2.5 times higher than that in the normal mode. This reduces erroneous detections caused by LED lights.
